The Stream Engine
Our Products
The Stream Engine
New! Injection Molded housing with drip lip!
In the 1970โs Paul Cunningham, owner and operator of Energy Systems & Design, had a need to power his off-grid house. He set off on a mission to create an efficient and reliable micro hydro machine. Utilizing a car alternator type micro hydro machine and the wheels he cast himself, he created the first machine. Through many hard-working days and design changes he was able to produce very efficient pelton and turgo wheels and sold these wheels to other enthusiasts.
After years of consistently improving the design he was able to create a highly efficient machine that was producing increased levels of power. It had become obvious that anyone with a suitable water source could be producing their very own renewable energy. With this idea in mind Paul established Energy Systems & Design in 1980.
After years of consistently improving the design he was able to create a highly efficient machine that was producing increased levels of power. It had become obvious that anyone with a suitable water source could be producing their very own renewable energy. With this idea in mind Paul established Energy Systems & Design in 1980.
Energy Systems & Design
Features
- High Efficiency - resulting in more power from the water source
- Tunable Generator which maximizes output
- More user friendly - Easy to install and service
- Outputs of 2+Kilowatts (KW) and 12, 24, & 48 volt options. Generating 240 volts
- Operating Range from 3 meters (10ft) to over 100 meters (300ft)
- Can operate with 1 to 4 nozzles
Same as basic Stream Engine
- Employs a brushless, permanent magnet alternator
- Adjustable to match turbine output to electrical load
- Capable of outputs up to 2+ kilowatt (KW)
- Plastic and stainless steel turbine wheel options
- Universal nozzles or brass nozzle inserts
- Made of non-corrosive alloys for long life and durability
- Made in-house to ensure top level of quality control
Energy Systems & Design
Pricing
Product | Price |
|---|---|
1 Nozzle SE Plastic Turgo | $2890 |
2 Nozzle SE Plastic Turgo | $2980 |
4 Nozzle SE Plastic Turgo | $3160 |
Stainless Steel Low Flow Option | $600 |
Stainless Steel Turgo Option | add $1000 |
High Voltage Option | add $500 |
High Current Option | add $500 |
Stainless Steel Turbine Wheel Option | add $ 700 |
Energy Systems & Design
Parts
Product | Price |
|---|---|
Turbine Housing (Unmachined) DIY special | $135 |
Turbine Housing (1 Nozzle) NEW | $235 |
Turbine Housing (2 Nozzle) INJECTION | $275 |
Turbine Housing (4 Nozzle) MOLDED | $345 |
Universal Nozzle | $35 |
Adaptor for Low Flow Nozzle Inserts NEW Black (1/2โณ NPT) | $35 |
Adaptor for Low Flow Nozzle Inserts ABS (7/8-14) | $40 |
Nozzle Inserts (1/8,3/16,1/4,5/16,3/8,7/16,1/2) 1/2โณ NPT | $35 |
Stainless Turgo Wheel (Stream Engine Wheel) | $1500 |
Stainless High Head Turbine Wheel (Stream Engine Wheel) | $900 |
Plastic Turgo Wheel (Stream Engine) | $425 |
Stainless Hub for Wheels (5/8-18) | $125 |
Bearing Kit, 3 x #6203 (Stream Engine & LH1000) | $35 |
Rotor, Shaft and Hub Assembly | $825 |
Rectifier (Bare) | $45 |
Rectifier (Wired) | $95 |
Junction Box | $425 |
Shipping Not Included. Pre-Payment Required On All Orders.
Energy Systems & Design
Manuals
Current manuals
Archived manuals
- Stream Engine Manual V2.0 (June 2017 โ July 2017)
- Stream Engine Manual V1.72 (July 2015 โ May 2017)
- Stream Engine Manual V1.6 (2011-2015)
- Stream Engine Manual V1.4 (2008-2011)
- Stream Engine Manual V1.0
- Stream Engine Manual (Pre-2008)
- Stream Engine Easy Tune Generator Manual V1.1
- Stream Engine Easy Tune Disassembly & Bearing Replacement
Energy Systems & Design
Output
